3Com 3031 Command Reference Manual page 250

250 C 4: L L P
HAPTER INK AYER ROTOCOL
Local IP address and the IP address (or IP address pool) assigned to the peer PPP
PPP working parameter
For the related commands, see ppp mp and ppp mp max-bind.
Example
Specify the corresponding virtual-template as 1 for the username
3Com, and configure the IP address of the virtual-template as
202.38.60.1.
[3Com] ppp mp user 3Com bind virtual-template 1
[3Com] interface virtual-template 1
[3Com-virtual-template1] ip address 202.38.60.1 255.255.255.0
ppp mp virtual-template Syntax
ppp mp virtual-template [ number ]
undo ppp mp
View
Interface view
Parameter
number: Configures the virtual template number to be bound by the interface,
which ranges from 0 to 1023.
Description
Using the ppp mp virtual-template command, you can configure the virtual
template number to be bound by the interface. Using the undo ppp mp
command, you can disable the MP binding of the interface.
By default, the MP binding of the interface is disabled, and the interface works in
ordinary PPP mode.
This command specifies the virtual template number to be bound on the interface.
The interface using this command to perform the MP binding needs not
configuring PAP or CHAP authentication. Two or more interfaces with the same
virtual template number is bound directly together. Moreover, this command is
mutually exclusive with the ppp mp command. That is, only one of the two
commands can be configured on a same interface.
For the related commands, see link-protocol ppp and interface virtual-template.
Example
Configure the PPP encapsulated interface Serial0/0/0 to work in MP view.
[3Com-Serial0/0/0] ppp mp virtual-template 1