3Com 3031 Command Reference Manual page 816

816 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
rconf: Enables resv conf-level alarming.
hello: Enables hello-level alarming.
perr: Enables path error-level alarming.
rerr: Enables Resv error-level alarming.
encdec: Enables CODEC-level alarming.
socket: Enables socket-level alarming.
traffic-control: Enables traffic control-level alarming.
main: Enables main-level alarming.
tool: Enables alarming for auxiliary modules (for example timers).
Description
Using the debugging mpls rsvp-te command, you can enable alarming for all
RSVP-TE modules. Using the undo debugging mpls rsvp-te command, you can
disable alarming for all RSVP-TE modules.
By default, debugging is disabled.
Example
Enable alarming for all RSVP-TE modules.
<3Com> debugging mpls rsvp-te all
delete hop Syntax
delete hop ip-address
View
Explicit path view
Parameter
ip-address: IP address for the node to be deleted
Description
Using the delete hop command, you can delete a node in the explicit path view.
Example
Delete a node.
[3Com] mpls te explicit-path 3Com enable
[3Com-mpls-te-expl-path-3Com] delete hop 10.0.0.1
display mpls rsvp-te Syntax
display mpls rsvp-te { interface interface-type interface-number }
View
Any view