3Com 3031 Command Reference Manual page 402

402 C 5: N
HAPTER ETWORK
debugging arp packet
display arp
P
ROTOCOL
Example
Configure the Ethernet MAC address e0-fc01-0 corresponding to the IP address
129.102.0.1.
[3Com] arp static 129.102.0.1 e0-fc01-0
Configure the Ethernet MAC address aa-fcc-12 corresponding to the IP address
11.0.0.1.
[3Com] arp static 11.0.0.1 aa-fcc-12
Syntax
debugging arp packet
undo debugging arp packet
View
User view
Parameter
None
Description
Using the debugging arp packet command, you can enable ARP packets
debugging; and using the undo debugging arp packet command, you can disable
the function.
Example
Enable ARP packets debugging.
<3Com> debugging arp packet
Syntax
display arp [ static | dynamic | all ]
View
Any view
Parameter
static: Indicates to show the static ARP entries.
dynamic: Indicates to show the dynamic ARP entries.
all: Indicates to show all ARP entries.
Description
Using the display arp command, you can view the ARP mapping table.