3Com 3031 Command Reference Manual page 658

658 C 6: R P
HAPTER OUTING
peer timer
policy vpn-target
ROTOCOL
Syntax
peer { group-name | peer-address } timer keep-alive keepalive-interval hold
holdtime-interval
undo peer { group-name | peer-address } timer
View
BGP view
Parameter
group-name: Specifies the name of peer group.
peer-address: Specifies the IP address of the peer.
keepalive-interval: Keepalive interval to be specified. The range is 1 to
4294967295 seconds. By default, its value is 60 seconds.
holdtime-interval: Holdtime interval to be specified. The range is 3 to
4294967295 seconds. By default, its value is 180 seconds.
Description
Using the peer timer command, you can configure Keepalive and Keepalive
interval for a peer (group). Using the undo peer timer command, you can restore
the interval default value.
The timer configured by using this command has a higher priority than the one
configured by using the timer command.
Example
Configure Keepalive and Holdtime intervals of the peer group "test".
[3Com-bgp] peer test timer keep-alive 60 hold 180
Syntax
policy vpn-target
undo policy vpn-target
View
VPN instance view
Parameter
None
Description
Using the policy vpn-target command, you can configure whether to perform the
filtering on the vpn-target extended community of the received routing
information. Using the undo policy vpn-target command, you can cancel the filter
function.
By default, the system performs the filtering on the vpn-target extended
community of the received routing information.