3Com 3031 Command Reference Manual page 672

672 C 6: R P
HAPTER OUTING
display ip ip-prefix
display route-policy
filter-policy export
ROTOCOL
Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameter
ip-prefix-name: Specifies displayed address prefix list name.
Description
Using the display ip ip-prefix command, you can view the address prefix list.
Display all the configured address prefix lists when no ip-prefix-name is specified.
For the related command, see ip ip-prefix.
Example
Display the information of the address prefix list named p1.
<3Com> display ip ip-prefix p1
ip-prefix p1
index 10: permit 192.168.10.10/16 greater-equal 17 less-equel 18
Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameter
route-policy-name: Specifies displayed route-policy name.
Description
Using the display route-policy command, you can view the configured route-policy
Display all the configured route-policy when no route-policy-name is specified.
For the related command, see route-policy.
Example
Display the information of route-policy named policy1.
<3Com> display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1
apply cost 100
matched : 0
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol ]
denied : 0