3Com 3031 Command Reference Manual page 505

reset ipx statistics
reset ipx routing-table
statistics
The 0s in front of node value cannot be omitted.
count: Number of Ping packets that are sent. By default, the value is 5.
timout: The period of time to wait for Ping response. By default, the value is 2
seconds.
size: Ping packet size. By default, the value is 100 bytes.
Description
Using the ping ipx command, you can check host reachability and network
connectivity in IPX network.
Example
Ping system whose destination address is 675.0000-a0b0-fefe with default
parameters.
<3Com> ping ipx 675.0000-a0b0-fefe
Syntax
reset ipx statistics
View
User view
Parameter
None
Description
Using the reset ipx statistics command, you can clear IPX statistics by the system.
Example
Clear IPX statistics.
<3Com> reset ipx statistics
Syntax
reset ipx routing-table statistics protocol [all | default | direct | rip | static]
View
User view
Parameter
all: Clears statistical information of all types IPX route.
default: Clears the statistical information of the default IPX route type.
direct: Clears the statistical information of the IPX route directly connected.
rip: Clears the statistical information of the IPX RIP route.
static: Clears the statistical information of the static IPX route.
IPX Configuration Commands 505