3Com 3031 Command Reference Manual page 96

96 C 2: S M
HAPTER YSTEM
redirect
screen-length
& M
AINTENANCE ANAGEMENT
Example
Set the transmission check bit on AUX interface to odd parity.
[3Com-ui-aux0] parity odd
Syntax
redirect
undo redirect
View
User interface view
Parameter
None
Description
Using the redirect command, you can set the redirection function, which is only
valid for the AUX and TTY user interfaces, on an asynchronous port. Using the
undo redirect command, you can disable the rediction function on the involved
port.
By default, the system does not support redirection.
This command is only valid for the AUX and the TTY user interfaces. For example,
executing the redirect command on a TTY user interface will enable the redirection
function of the user interface.
For related commands, see telnet and display tcp status.
Example
Enable the redirection function of user interface TTY7.
[3Com-ui-tty7] redirect
Syntax
screen-length screen-length
undo screen-length
View
User interface view
Parameter
screen-length: Number of rows displayed in a screen in the event of split screen
display, which is in the range of 0 to 512.
C
OMMANDS