3Com 3031 Command Reference Manual page 33

display logbuffer
Information Center: enabled
Log host:
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 89, channel number : 4, channel name : logbuffer
dropped messages 0, overwrote messages 0
Trap buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 0, channel number:3, channel name:trapbuffer
dropped messages 0, overwrote messages 0
Information timestamp setting:
log - date, trap - date, debug - boot
Sent messages = 89, Received messages = 89
Syntax
display logbuffer [ size size-value | summary ] [ level level-number ] [ | [ begin |
include | exclude ] string ]
View
Any view
Parameter
size: Displays the number of information entries in the logbuffer.
size-value: The number of displayed information entries.
summary: A summary of the logbuffer.
level: Displays only the count of information entries at a specified level.
level-number: The specified level in the ranging 1 to 8.
|: Uses regular expression to filter the information for display.
begin: Displays the information beginning with the specified characters (string).
include: Displays the information including the specified characters (string).
exclude: Displays the information excluding the specified characters (string).
string: Characters of the regular expression.
Description
Using the display logbuffer command, you can display the information recorded in
the logbuffer.
Information Processing Commands 33