3Com 3031 Command Reference Manual page 263

VLAN Configuration Commands 263
After setting the maximum number of processed packets per second on a certain
VLAN, and the received packet number belonging to this VLAN reaches the
limitation, the subsequently received packets belonging to the VLAN will be
discarded. Through this command, you can perform flow control.
For the related command, see display vlan max-packet-process.
Example
Set the maximum number of processed packets per second on the VLAN 10 as
200000.
[3Com] max-packet-process 200000 10
reset vlan statistics Syntax
interface
reset vlan statistics interface interface-type interface-number
View
User view
Parameter
interface-type interface-num: Used to specify the interface. At present, the
interface types supported include Ethernet interface and Gigabit Ethernet
interface, and it only supports sub-interface.
Description
Using the reset vlan statistics interface command, you can clear VLAN statistics on
a certain interface.
For the related command, see show vlan statistics interface.
Example
Clear the VLAN statistics on Ethernet subinterface 2/0/0.1.
<3Com> reset vlan statistics interface ethernet 2/0/0.1
reset vlan statistics vid Syntax
reset vlan statistics vid vid
View
User view
Parameter
vid: VLAN ID, used to identify a VLAN.
Description
Using the reset vlan statistics vid command, you can clear the VLAN statistics.