3Com 3031 Command Reference Manual page 480

480 C 5: N P
HAPTER ETWORK ROTOCOL
debugging ipx ping
pktlen = 480, hops = 0, pkttype = 0x4,
dstnet = 0xb, dstnode = ffff-ffff-ffff, dstsocket = 0x452,
srcnet = 0xb, srcnode = 00e0-fc01-54f6, srcsocket = 0x452
prompt: IPX packet is delivering up!
Description of display information of the debugging ipx packet command
Table 7
Item Description
pktlen = Length of packet in decimal format (not including MAC address header).
hops = How many routers the packet has passed through.
pkttype = Packet type in hexadecimal format.
dstnet = Destination network number of the packet.
dstnode = Destination node address of the packet.
dstsocket = Destination socket of the packet.
srcnet = Source network number of the packet.
srcnode = Source node address of the packet.
srcsocket = Source socket of the packet.
promt: Prompt of how router processes the packet and reasons of discarding packet.
Syntax
debugging ipx ping
undo debugging ipx ping
View
User view
Parameter
None
Description
Using the debugging ipx ping command, you can enable IPX Ping packet
debugging switch to view the contents of Ping packet received and transmitted.
Using the undo debugging ipx ping command, you can disable the debugging
switch.
By default, IPX Ping packet debugging switch is disabled.
Example
Enable IPX Ping packet debugging switch.
<3Com> debugging ipx ping
*0.15396012-IPX-8-IPXPING:
Ping receiving: Request, Src = a.00e0-fc04-8859, Dst =
a.00e0-fc01-54f6
*0.15396130-IPX-8-IPXPING:
Ping sending: Response, Src = a.00e0-fc01-54f6, Dst =
a.00e0-fc04-8859
Table 8 Description of display information of the debugging ipx ping command
Item
Src =
Dst =
Description
Source address of Ping packet.
Destination address of Ping packet.