3Com 3031 Command Reference Manual page 24

24 C 2: S M & M C
HAPTER YSTEM AINTENANCE ANAGEMENT OMMANDS
Example
Enable IP packet debugging.
display debugging Syntax
display debugging [ interface interface-type interface-number] [ module-name ]
View
Any view
Parameter
module-name: Module name.
interface-type: Interface type.
interface-number: Interface number.
Description
Using the display debugging command, you can display the enabled debugging
switches.
By default, no parameters have been defined and all the enabled debugging
switches are displayed.
For related command, see debugging.
Example
Display all the enabled debugging switches.
<3Com> display debugging
IP packet debugging switch is on.
display Syntax
diagnostic-information
display diagnostic-information
View
Any view
Parameter
None
Description
Using the display diagnostic-information command, you can display the operating
information of all the active modules of the system and collect all the information
at a time so as to isolate the problem when failure occurs to the system.