3Com 3031 Command Reference Manual page 32

32 C 2: S M
HAPTER YSTEM
display info-center
& M
AINTENANCE ANAGEMENT
Table 1 Channel names and their associated channel numbers
Channel name
channel6
channel7
channel8
channel9
console
logbuffer
loghost
monitor
snmpagent
trapbuffer
Description
Using the display channel command, you can display the contents of an
information channel.
This command displays the setting states of all channels when executed without
any parameter.
Example
Display the contents of information channel 0.
<3Com> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG LEVEL
ffff0000 all Y
Syntax
display info-center
View
Any view
Parameter
None
Description
Using the display info-center command, you can display all the information
recorded in the info-center.
For related commands, see info-center enable, info-center loghost, info-center
logbuffer, info-center trapbuffer, info-center console channel, and info-center
monitor channel.
Example
Display the information recorded in the info-center.
<3Com> display info-center
C
OMMANDS
ENABLE TRAP LEVEL
warning Y
Information channel number
6
7
8
9
0
4
2
1
5
3
ENABLE DEBUG LEVEL
debugging Y debugging