3Com 3031 Command Reference Manual page 277

isdn L3-timer
isdn number-property
[3Com-Bri0/0/0] isdn ignore sending-complete outgoing
Syntax
isdn L3-timer timer-name time-interval
undo isdn L3-timer { timer-name | all }
View
ISDN interface view
Parameter
timer-name: Name of a L3 timer of the ISDN protocol.
time-interval: Timer duration, which can take on one of the values listed in the
following table.
all: Restores the default durations of all the L3 timers.
Table 10 Description of Q931 timers
timer-name
t301
t302
t303
t304
t305
t308
t309
t310
t313
t316
t322
Description
Using the isdn L3-timer command, you can configure the duration of an ISDN L3
timer. Using the undo isdn L3-timer command, you can restore the default
duration of the ISDN L3 timer on the interface.
You can view the default durations of the L3 timers in the ISDN protocol by
executing the display isdn parameters command.
Example
Set the duration of the L3 timer T301 on the interface Bri 0/0/0 to 160 seconds.
[3Com-Bri0/0/0] isdn l3-timer t301 160
Syntax
isdn number-property number-property [ calling | called ]
undo isdn number-property [ calling | called ]
ISDN Configuration Commands
Value range (in units)
30 ~ 1200
5 ~ 60
2 ~ 10
10 ~ 60
4 ~ 30
2 ~ 10
10 ~ 180
10 ~ 180
2 ~ 10
2 ~ 180
2 ~ 10
277
Default (in units)
240
15
4
30
30
4
90
40
4
120
4