3Com 3031 Command Reference Manual page 733

MSDP Configuration Commands 733
<3Com> system-view
<3Com] msdp
<3Com-msdp] peer 125.10.7.6 connect-interface ethernet 0/1/0
peer description Syntax
peer peer-address description text
undo peer peer-address description
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
text: Descriptive text, being case sensitive. The maximum length is 80 characters.
Description
Using the peer description command, you can configure descriptive text to MSDP
peer. Using the undo peer description command, you can remove the descriptive
text configured.
By default, an MSDP peer has no descriptive text.
Administrator can conveniently differentiate MSDP peers by configuring
descriptive text.
For the related command, see display msdp peer-status.
Example
Add descriptive text CstmrA to router 125.10.7.6 to specify that the router is
Client A.
<3Com> system-view
<3Com] msdp
<3Com-msdp] peer 125.10.7.6 description router CstmrA
peer mesh-group Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group name
View
MSDP view
Parameter
name: Name of an Mesh Group, being case sensitive. The maximum length is 32
characters.
peer-address: Address of an MSDP peer to be a member of the Mesh Group.