3Com 3031 Command Reference Manual page 447

View
Any view
Parameter
Description
Using the display fib ip-prefix command, you can filter and display FIB information.
According to the name of prefix-list entered, you can display the FIB entries
matching the filtering rules in the prefix list in a format.
If no FIB table entry matching the prefix list, the prompt information will be
displayed that the number of FIB entry matched by the prefix list is 0; if the name
of ip-prefix cannot be found, all FIB table entries will be displayed; if the FIB table
entries after filtering is not 0, they will be output in a format.
If no FIB table entry matching the prefix list, the following information will be
output:
Route entry matched by prefix-list abc1:
Summary count: 0
If the number of FIB table entries after filtering is not 0, FIB table entry information
will be output in the following format:
Route entry matched by prefix-list abc2:
Summary count: 1
Destination/Mask
127.0.0.0/8
Example
Display the FIB table entries matched by the prefix list abc0.
<3Com> display fib ip-prefix abc0
Route Entry matched by prefix-list abc0:
Summary count: 4
Destination/MaskNexthopFlagTimeStampInterface
127.0.0.0/8127.0.0.1Ut[0]InLoopBack0
127.0.0.1/32127.0.0.1Ut[0]InLoopBack0
169.0.0.0/82.1.1.1SUt[0]Ethernet 0/0/0
169.0.0.0/152.1.1.1SUt[0]Ethernet 0/0/0
display fib longer Syntax
display fib dest-addr1 [ dest-mask2 ] [ longer ]
1. Using the above command, you can display the FIB table entries matching the
destination address. Different parameters selected leads to different matching
methods.
display fibdest-addr1 dest-mask1 dest-addr2 dest-mask2
2. Using the above command, you can display the FIB table entries whose
destination address ranges from dest-addr1 dest-mask1 to dest-addr2
dest-mask2, including the FIB entries exactly matching dest-addr1 dest-mask1 and
dest-addr2 dest-mask2.
listname: The name of the prefix list.
Nexthop
127.0.0.1
IP Performance Configuration Commands
Flag TimeStamp
U t[0]
447
Interface
InLoopBack0