3Com 3031 Command Reference Manual page 66

66 C 2: S M
HAPTER YSTEM
display ftp-user
& M
AINTENANCE ANAGEMENT
Parameter
None
Description
Using the display ftp-server command, you can display the parameters of the
current FTP server.
After the FTP parameters are configured, this command can be used to display the
configuration results.
Example
Display the FTP parameters configured.
<3Com> display ftp-server
Ftp server is running
Max user number5
User count2
Timeout(minute)30
The information shown above indicates that the FTP server has started and can
support up to 5 log-on users simultaneously and now there are two log-on users
and the timeout of an FTP user is 30 minutes.
Syntax
display ftp-user
View
Any view
Parameter
None
Description
Using the display ftp-user command, you can display the parameters of the
current FTP user.
Example
Display the FTP user parameter configuration.
<3Com> display ftp-user
usernamehost porttopdiridle
3Com 10.110.3.51074c:/3Com2
The information shown above indicates that a connection between an FTP user
named 3Com and the FTP server has been established. the IP address of the
remote host is 10.110.3.5 and the remote port number is 1074. the authorization
directory is flash:/3Com and so far the user has not sent any service request to the
FTP server for 2 minutes.
C
OMMANDS