3Com 3031 Command Reference Manual page 18

18 C 1: C
HAPTER ONFIGURATION
quit
Reboot
C
OMMANDS
<3Com> lock
Password:
Again:
Syntax
quit
View
Any view
Parameter
None
Description
Using the quit command, you can quit from the active view to a lower-level view
(if the active view is user view, you will exit the system).
Views fall into three levels that are, in ascending order:
User view (with user level as 0)
System view (with user level as 3)
Configuration view (routing protocol view, interface view, VPDN group view,
etc)
For the related command, see return.
Example
Switch from Ethernet1/0/0 interface view to system view, and then to user view.
[3Com-Ethernet1/0/0] quit
[3Com] quit
<3Com>
Syntax
reboot
View
User view
Parameter
None
Description
Using the reboot command, you can reboot the device.
This command produces the same effect as the power is turned on and then on,
but provides the user with a convenient method of rebooting the device from a
remote site.