3Com 3031 Command Reference Manual page 826

826 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
mpls rsvp-te hello-lost Syntax
mpls rsvp-te hello-lost times
undo mpls rsvp-te hello-lost
View
System view
Parameter
times: Times value when no Hello response messages are received consecutively, in
the range of 3~10. By default, it is 3.
Description
Using the mpls rsvp-te hello-lost command, you can the times value when no
Hello response messages are received consecutively. When the times value is
exceeded, the corresponding link is judged as faulty. Using the undo mpls rsvp-te
hello-lost command, you can restore the default value.
For the related command, see mpls rsvp-te timer hello.
Example
Set the times value to 5 when no Hello response messages are received
consecutively.
[3Com] mpls rsvp-te hello-lost 5
mpls rsvp-te Syntax
keep-multiplier
mpls rsvp-te keep-multiplier times
undo mpls rsvp-te keep-multiplier
View
System view
Parameter
times: RSVP refreshing period multiplier for PSB and RSB timeout, in the range of
1~255. By default, it is 3.
Description
Using the mpls rsvp-te keep-multiplier command, you can set the multiplier for
PSB and RSB timeout. In calculating timed refreshing of PSB and RSB,
Expired_Time = (keep-multiplier + 0.5) ¥ 1.5 ¥ refresh-time. Using the undo mpls
rsvp-te keep-multiplier command, you can restore the default value.
For the related command, see mpls rsvp-te timer refresh.
Example
Set the multiplier as 5.
[3Com] mpls rsvp-te keep-multiplier 5