3Com 3031 Command Reference Manual page 124

124 C 2: S M & M C
HAPTER YSTEM AINTENANCE ANAGEMENT OMMANDS
Delete the community name comaccess.
[3Com] undo snmp-agent community comaccess
snmp-agent group Syntax
snmp-agent group { v1 | v2c } group-name { [ read read-view ] | [ write write-view ]
| [ notify notify-view ] } [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
snmp-agent group v3 group-name [ authentication | privacy ] { [ read read-view ] |
[ write write-view ] | [ notify notify-view ] } [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameter
v1: V1 security mode the user uses.
v2c: V2C security mode the user uses.
v3: V3 security mode the user uses.
group-name: Group name, in the range of 1 to 32 bytes.
authentication: Performs authentication of the packet without encryption.
privacy: Performs authentication and encryption of the packet.
read: Enables the setting of read-only view.
read-view: Name of the read-only view, in the range of 1 to 32 bytes.
write: Enables the setting of reading and writing view.
write-view: Name of the reading and writing view, in the range of 1 to 32 bytes.
notify: Enables the setting of notify view.
notify-view: Name of the notify view , in the range of 1 to 32 bytes.
acl: Sets the list of access view.
acl-number: Standard access list, in the range of 1 to 99.
Description
Using the snmp-agent group command, you can configure a new SNMP group,
i.e., to map the SNMP user to the SNMP view. Using the undo snmp-agent group
command, you can delete a specified SNMP group.