3Com 3031 Command Reference Manual page 254

254 C 4: L L
HAPTER INK AYER
pppoe-server bind
virtual-template
pppoe-server
max-sessions local-mac
P
ROTOCOL
<3Com> display pppoe-server session packet
SID RemMAC
OutD
1 0050ba1a02ce 0001af02a40f
Table 3 Description of the output
Field
InP
InO
InD
OutP
OutO
OutD
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
View
Interface view
Parameter
number: Number of the virtual-template for access to PPPoE, and its value ranges
from 0 to 1023.
Description
Using the pppoe-server bind virtual-template command, you can enable PPPoE on
the virtual-template specified by the Ethernet interface. Using the undo
pppoe-server bind command, you can disable PPPoE protocol on the relevant
interface.
By default, PPPoE protocol is disabled.
For the related command, see link-protocol ppp.
Example
Enable PPPoE on virtual-template 1 of Ethernet interface Ethernet1/0/0.
[3Com-Ethernet1/0/0] pppoe-server bind virtual-template 1
Syntax
pppoe-server max-sessions local-mac number
undo pppoe-server max-sessions local-mac
LocMAC InP
42
InO InD OutP
2980 0 16
Description
In Packets, Packages received
In Octets, Bytes received
In Discards, Received and then discarded
packages
Out Packets, Packages sent
Out Octets, Bytes sent
Out Discard, Discarded packages that might be
sent.
OutO
343 0