3Com 3031 Command Reference Manual page 123

snmp-agent community
Example
Disable the operating SNMP version.
[3Com] undo snmp-agent
SNMP Agent disabled
Syntax
snmp-agent community { read | write } community-name [ [ mib-view view-name ]
| [ acl acl-number ] ]*
undo snmp-agent community community-name
View
System view
Parameter
read: Indicates that the community name has the read-only authority in the
specified view.
write: Indicates that the community name has the read and write authority in the
specified view.
community-name: Character string of community name.
mib-view: MIB view available for the specified community name
view-name: Name of MIB view.
acl: Sets the ACL corresponding to the community name.
acl-number: Number of the ACL, range 1 to 99.
Description
Using the snmp-agent community command, you can set the community access
name of SNMPV1 and SNMPV2C and MIB views and ACLs available for the
community name. Using the undo snmp-agent community command, you can
remove the setting.
For the related command, see snmp-agent group, snmp-agent usm-user.
Example
Set the community name to comaccess and allow read-only access with this
community name.
[3Com] snmp-agent community read comaccess
Set the community name to mgr and enable reading and writing access.
[3Com] snmp-agent community write mgr
SNMP Configuration Commands 123