3Com 3031 Command Reference Manual page 51

System Operating Management Commands - AR46 Series 51
Description
Using the display schedule reboot command, you can check the configuration of
related parameters of the router schedule reboot terminal service.
For the related command, see reboot, schedule reboot at, schedule reboot delay,
undo schedule reboot.
Example
Display the configuration of the schedule reboot terminal service parameters of
the current router.
<3Com> display schedule reboot
Reboot system at 16:00:00 2002/11/1 (in 2 hours and 5 minutes).
remove slot
Syntax
remove slot slotnum
undo remove slot slotnum
View
User view
Parameter
slotnum: Slot number for the interface card
Description
Using the remove slot command, you can run pre-processing before removing an
interface card. You can also cancel a misoperation with the undo remove slot
command if you change your mind to remove the card after executing the remove
slot command. The undo remove slot command is unnecessary when you remove
a card, but insert it immediately.
For the related command, see reboot, schedule reboot at, schedule reboot delay,
undo schedule reboot.
Example
Remove the interface card at slot 3.
<3Com>remove slot 3
reset alarm urgent
Syntax
reset alarm urgent
View
User view