3Com 3031 Command Reference Manual page 95

User Interface Configuration Commands 95
View
User interface view
Parameter
seconds: Timeout time in the range of 1 to 60 seconds.
Description
Using the modem timer answer command, you can set the timeout time waiting
for the carrier signal after the off-hook action for setting up an inbound
connection. Using the undo modem timer answer command, you can restore the
default waiting timeout time.
The waiting timeout time defaults to 30 seconds.
This command is valid for the AUX interface and other asynchronous interfaces
but not for the console interface.
Example
None
parity
Syntax
parity { none | even | odd | mark | space }
undo parity
View
User interface view
Parameter
none: Implements no check.
even: Implements even parity check.
odd: Implements odd parity check.
mark: Implements mark check.
space: Implements space check.
Description
Using the parity command, you can set the check bit of a user interface. Using the
undo parity command, you can restore the check mode of user interface to none.
By default, no check is performed.
The configuration can become effective only when the involved serial interface
works in the asynchronous flow mode.