3Com 3031 Command Reference Manual page 538

538 C 6: R
HAPTER OUTING
display ip routing-table
protocol
P
ROTOCOL
Example
Display the summary of the active route that is filtered through ip prefix list abc2.
<3Com> display ip routing-table ip-prefix abc2
Routes matched by ip-prefix abc2:
Summary count: 4
Destination/MaskProtoPreCost NexthopInterface
127.0.0.0/8Direct00127.0.0.1InLoopBack0
127.0.0.1/32Direct00127.0.0.1InLoopBack0
169.0.0.0/8Static6002.1.1.1LoopBack1
169.0.0.0/15Static6002.1.1.1LoopBack1
Display the verbose information of the active and inactive routes
that are filtered through ip prefix list abc2.
<3Com> display ip routing-table ip-prefix abc2 verbose
Routes matched by ip-prefix abc2:
Generate Default: no
+ = Active Route, - = Last Active,
Summary count:4
**Destination: 127.0.0.0Mask: 255.0.0.0
Protocol: DirectPreference: 0
*NextHop: 127.0.0.1Interface: 127.0.0.1(InLoopBack0)
Vlinkindex: 0
State: <NoAdvise Int ActiveU Retain Multicast Unicast>
Age: 3:47Metric: 0/0
**Destination: 127.0.0.1Mask: 255. 255. 255. 255
Protocol: DirectPreference: 0
*NextHop: 127.0.0.1Interface: 127.0.0.1(InLoopBack0)
Vlinkindex: 0
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Multicast
Unicast>
Age: 3:47Metric: 0/0
**Destination: 179.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference:-60
*NextHop: 4.1.1.1
Vlinkindex: 0
State: <Int Hidden Static Unicast>
Age: 3:47Metric: 0/0
**Destination: 169.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Metric: 0/0
**Destination: 169.0.0.0Mask: 255.254.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Metric: 0/0
Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View
Any view
= Both* = Next hop in use