3Com 3031 Command Reference Manual page 434

434 C 5: N
HAPTER ETWORK
display dhcp client
P
ROTOCOL
Parameter
event: Protocol events of the DHCP client, which include address allocation and
data updating.
packet: DHCP packets received and sent by the DHCP client.
error: Unknown packet information or error information.
all: Enables debugging of the DHCP client in all the information (event, packet,
and error).
Description
Using the debugging dhcp client command, you can enable debugging on the
DHCP client. Using the undo debugging dhcp client command, you can disable
debugging on the DHCP client. By default, DHCP client debugging is disabled.
Example
Enable event debugging on the DHCP client.
<3Com>debugging dhcp client event
Syntax
display dhcp client [ verbose ]
View
Any view
Parameter
verbose: Statistic details of the DHCP client.
Description
Using the display dhcp client command, you can display the statistic information
of the DHCP client. Executing the command attached without the keyword
parameter verbose will display only the brief address allocation information on the
DHCP client.
Example
Display the statistic details of the DHCP client.
[3Com] display dhcp client verbose
DHCP client statistic infomation:
Ethernet0/0:
Current machine state: BOUND
Alloced IP: 169.254.0.2 255.255.0.0
Alloced lease: 86400 seconds, T1: 43200 seconds, T2: 75600 seconds
Lease from 2002.09.20 01:05:03
Server IP: 169.254.0.1
Transaction ID = 0x3d8a7431
Default router: 2.2.2.2
DNS server: 1.1.1.1
Domain name: 3Com.com
Client ID: 3Com-00e0.fc0a.c3ef-Ethernet0/0
Next timeout will happen after 0 days 11 hours 56 minutes 1 seconds.
Ethernet2/0:
to 2002.09.21 01:05:03