3Com 3031 Command Reference Manual page 573

View
Any view
Parameter
Description
Using the display ospf interface command, you can view the OSPF interface
information.
Example
Display the OSPF ethernet2/0/0 interface information.
<3Com> display ospf interface ethernet2/0/0
Interface: 10.110.0.2 (Ethernet2/0/0)
Cost: 1 State: BackupDR
Priority: 1
Designated Router: 10.110.0.1
Backup Designated Router: 10.110.0.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
display ospf lsdb Syntax
display ospf [ area-id ] lsdb [ brief ] [ asbr | ase | network | nssa | opaque | router |
summary ] [ ip-address ] [ originate-router ip-address ] [ self-originate ]
View
Any view
Parameter
interface-type: Interface type
port-number: Interface number.
area-id: ID of the OSPF area, represented by decimal integer ranging from 0 to
4294967295 or in IP address format.
brief: Brief database information.
asbr: Database information of Type-4 LSA (summary-Asbr-LSA).
ase: Database information of Type-5 LSA (AS-external-LSA).
network: Database information of Type-2 LSA (Network-LSA).
nssa: Database information of Type-7 LSA (NSSA-external-LSA)
opaque: Database information of Opaque LSA.
router: Database information of Type-1 LSA (Router-LSA)
summary: Database information of Type-3 LSA (Summary-Net-LSA)
ip-address: Link state ID in IP address format.
originate-router ip-address: IP address of the router advertising LSA packet.
self-originate: Database information of self-originated LSA generated by local
router..
OSPF Configuration Commands
Type: Broadcast
573