3Com 3031 Command Reference Manual page 578

578 C 6: R P
HAPTER OUTING
display ospf
request-queue
ROTOCOL
Description
Using the display ospf peer command, you can view the information about the
neighbors in OSPF areas.
Using the display ospf peer brief command, you can view the brief information of
neighbors in OSPF, mainly the neighbor number at all states in every area.
The display format of OSPF neighbor valid time is different according to the length
of time. Description is as follows:
XXYXXMXXD: More than a year, namely year: month: day
XXXdXXhXXm: More than a day but less than a year, that is, day: hour: minute
XX: XX: XX: Less than a day, namely hour: minute: second
Example
View the information of OSPF peer.
<3Com> display ospf peer
Area 0.0.0.0 interface 1.1.1.1(Serial2/0/0)'s neighbor(s)
RouterID: 1.1.1.3
State: Full
DR: 1.1.1.3
Dead timer expires in 31s
Neighbor is comes for 00:08:24
View the brief information of neighbors in areas.
<3Com> display ospf peer brief
Area ID
Full Total
0.0.0.0
0.0.0.1
Total
Syntax
display ospf request-queue
View
Any view
Parameter
None
Description
Using the display ospf request-queue command, you can view the information
about the OSPF request-queue.
Example
View the information about the OSPF request-queue.
<3Com> display ospf request-queue
The Router's Neighbors is
RouterID:
Address: 1.1.1.3
Mode: Nbr is Master
BDR: 1.1.1.1
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Statistics
Down Attempt Init 2-Way ExStart Exchange Loading
0 0 0 0
0 0 0 0
0 0 0 0
103.160.1.1 Address: 103.169.2.5
Priority: 1
0 0 0
0 0 0
0 0 0
1 1
1 1
2 2