3Com 3031 Command Reference Manual page 596

3com 3031: reference guide
Hide thumbs Also See for 3031:
Table of Contents

Advertisement

596
C
6: R
HAPTER
OUTING
snmp-agent trap enable
ospf
P
ROTOCOL
Different processes can disable the same interface to transmit OSPF packet. While
silent-interface command only takes effect on the interface enabled with OSPF by
this process, being invalid for the interface enabled by other processes.
Example
Disable interface serial2/0/0 to transmit OSPF packet.
[3Com-ospf-1] silent-interface serial2/0/0
Disable interface Ethernet2/0/0 to transmit OSPF packet in both OSPF
process 100 and OSPF process 200.
[3Com] router id 10.110.1.9
[3Com] ospf 100
[3Com-ospf-100] silent-interface ethernet 2/0/0
[3Com-ospf-100] quit
[3Com] router id 20.18.0.7
[3Com] ospf 200
[3Com-ospf-200] silent-interface ethernet 2/0/0
Syntax
snmp-agent trap enable ospf [ process-id ] [ trap-type ]
undo snmp-agent trap enable ospf [ trap-type ]
View
System view
Parameter
process-id: OSPF process number. If no OSPF process number is specified, this
command is valid for all the current OSPF processes.
trap-type: Type of SNMP TRAP packet transmitted by OSPF. It can be the
keyword in the following table.
Table 3 SNMP TRAP type keywords
keyword
ifauthfail
ifcfgerror
ifrxbadpkt
ifstatechange
iftxretransmit
lsdbapproachoverflo
w
lsdboverflow
maxagelsa
nbrstatechange
originatelsa
virifauthfail
virifcfgerror
virifrxbadpkt
virifstatechange
viriftxretransmit
virnbrstatechange
description
Enables the InterfaceAuthenticationFailure trap packets
Enables the InterfaceConfigError trap packets
Enables the InterfaceRecieveBadPacket trap packets
Enables the InterfaceStateChange trap packets
Enables the InterfaceTxRetransmitPacket trap packets
Enables the LsdbApproachOverflow trap packets
Enables the LsdbOverflow trap packets
Enables the MaxAgeLsa trap packets
Enables the NeighborStateChange trap packets
Enables the OriginateLsa trap packets
Enables the VirtualInterfaceAuthenticationFailure trap
packets
Enables the VirtualInterfaceConfigError trap packets
Enables the VirtualInterfaceRecieveBadPacket trap packets
Enables the VirtualInterfaceStateChange trap packets
Enables the VirtualInterfaceTxRetransmitPacket trap packets
Enables the VirtualNeighborStateChange trap packets

Advertisement

Table of Contents
loading

Table of Contents