3Com 3031 Command Reference Manual page 781

BGP/MPLS VPN Configuration Commands 781
View
Route-policy view
Parameter
vpn-name: Name of the configured VPN instance. At most, 6 VPN names can be
configured.
Description
Using the apply access-vpn vpn-instance command, you can specify packet to
search private network forwarding route in vpn-name1, vpn-name2, vpn-name3,
vpn-name4, vpn-name5, vpn-name6(if they all exist) and perform the
corresponding forwarding after policy route is enabled. Using the undo apply
access-vpn vpn-instance command, you can remove this function.
Example
Specify the configured VPN instance.
[3Com-route-policy] apply access-vpn vpn-instance vpn1
debugging bgp Syntax
debugging bgp [ { { keepalive | open | packet | update | route-refresh } [ receive |
send | verbose ] } { all | event | normal }
undo debugging bgp [ { { keepalive | open | packet | update | route-refresh } [
receive | send | verbose ] } { all | event | normal }
View
User view
Parameter
keepalive: Displays BGP keepalives.
open: Displays BGP OPEN packet information.
packet: Displays BGP packets.
update: Displays BGP updates.
route-refresh: Displays BGP route refreshing packets.
receive: Displays received information.
send: Displays sent information.
verbose: Displays detailed information
all: Displays debugging of all levels.
event: Displays BGP event.
normal: Displays BGP normal debugging function.