3Com 3031 Command Reference Manual page 257

display pppoe-server
session
Parameter
option: PPPoE Client debugging switch type, see the following table for more
details.
interface type number: Interface type and number, used to enable the debugging
switch of the specified interface. If no interface is specified, the system will enable
the debugging switch of all interfaces.
Table 4 PPPoE Client debugging switch type and explanation
Debugging switch type
all
data
error
event
packet
verbose
Description
The command debugging pppoe-client is used to enable PPPoE Client debugging
switch.
Example
None
Syntax
display pppoe-client session { summary | packet } [ dial-bundle-number number ]
View
Any view
Parameter
summary: Displays the summary of PPPoE session.
packet: Displays the statistics of PPPoE session data packet.
dial-bundle-number number: Displays the statistics of the specified PPPoE session.
If PPPoE session is not specified, the system will display the statistics of all PPPoE
sessions.
Description
The command display pppoe-client session is used to display the status and
statistics of PPPoE session.
Example
Display the summary of PPPoE session.
[3Com]display pppoe-client session summary
PPPoE Client Session:
PPPoE Client Configuration Commands
Explanation
Enable all PPPoE Client debugging switches
Enable the PPPoE Session phase data packet debugging switch
Enable PPPoE Client error information debugging switch
Enable PPPoE Client event debugging switch
Enable PPPoE Discovery phase negotiation packet debugging switch
Display the verbose contents of PPPoE data
257