3Com 3031 Command Reference Manual page 530

530 C 5: N
HAPTER ETWORK
sdlc timer lifetime
P
ROTOCOL
View
Synchronous serial interface view
Parameter
mseconds: The SDLC primary station response waiting time, ranging from 1 to
60000ms.
Description
Using the sdlc timer ack command, you can configure the SDLC primary station
response waiting time (mseconds). Using the undo sdlc timer ack command, you
can restore the default value of the SDLC primary station response waiting time.
By default, the configured SDLC primary station response waiting time is 3000ms.
The primary station response waiting time (mseconds) refers to the waiting time
for the response from the secondary station after the primary station sends
information frames.
Example
Configure the SDLC primary station response waiting time (mseconds) as 2000ms.
[3Com-Serial1/0/0] sdlc timer ack 2000
Syntax
sdlc timer lifetime mseconds
undo sdlc timer lifetime
View
Synchronous serial interface view
Parameter
mseconds: The SDLC secondary station response waiting time, ranging from 1
to 60000ms.
Description
Using the sdlc timer lifetime command, you can configure the SDLC secondary
station response waiting time (mseconds). Using the undo sdlc timer lifetime
command, you can restore the default value of the SDLC secondary station
response waiting time.
By default, the SDLC secondary station response waiting time (mseconds) is
500ms.
The secondary station response waiting time (mseconds) refers to the waiting time
for the response from the primary station after the secondary station sends
information frames.
Example
Configure the SDLC secondary station response waiting time (mseconds) as
1000ms.
[3Com-Serial1/0/0] sdlc timer lifetime 1000