3Com 3031 Command Reference Manual page 103

debugging ntp-service 103
Parameter
access: NTP access control debugging.
adjustment: NTP clock adjustment debugging.
all: All the NTP information debugging.
authentication: NTP identification authentication debugging.
event: NTP event debugging.
filter: NTP filter information debugging.
packet: NTP packet debugging.
parameter: NTP clock parameter debugging.
refclock: NTP reference clock debugging.
selection: NTP clock selection information debugging.
synchronization: NTP clock synchronous information debugging.
validity: Validity debugging of NTP remote host.
Description
Using the debugging ntp-service command, you can enable debugging of all types
of NTP service information. Using the undo debugging ntp-service command, you
can disable NTP service debugging.
By default, all the information debugging is disabled.
Example
Enable the ntp access control debugging.
<3Com> debugging ntp-service access
display ntp-service
Syntax
sessions
display ntp-service sessions [ verbose ]
View
Any view
Parameter
verbose: Displays the detailed information of sessions.
Description
Using the display ntp-service sessions command, you can display the status of all
the sessions maintained by the local device ntp.