Dlsw Configuration Commands - 3Com 3031 Command Reference Manual

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

DLSw Configuration

bridge-set (in

synchronous serial

interface view)

The reset ipx routing-table statistics command is used to clear the statistical

information of a specified type of IPX route. Such information can be shown upon

the terminal using the display ipx routing-table statistics command.

Add 5 IPX static routes to the router, then delete them, and then add anther 9 IPX

static routes. The IPX route statistical information would be as follows:

[3Com]dis ipx routing-table statistics

Routing tables:

Clear the IPX static route.

<3Com>reset ipx routing-table statistics protocol static

This will erase the specific routing counters information.

Are you sure?[Y/N]y

The displayed statistical information shows that all three items (add, delete, freed)

of static route have changed to 0, and the below Total item has also changed

accordingly.

<3Com>dis ipx routing-table statistics

bridge-set bridge-set-number

undo bridge-set bridge-set-number

Synchronous serial interface view