3Com 3031 Command Reference Manual page 19

Basic Configuration Commands 19
The operation of this command will render the network unusable for a short
period of time. So it should be used with caution. Before rebooting the Router,
remember to save the configuration file if necessary,
Example
Reboot the device.
<3Com> reboot
System will reboot! Continue?[Y/N]
return
Syntax
return
View
Any view, except user view
Parameter
None
Description
Using the return command, you can return to user view from any other views. The
combination key <Ctrl+Z> performs the same function as the return command.
For the related command, see quit.
Example
Return to user view from system view.
[3Com] return
<3Com>
super
Syntax
super [ level ]
View
User view
Parameter
: User level ranging from 0 to 3.
Level
Description
Using the super command, you can switch from current user level to a specified
level.
User level refers to the class of a login user. There are 4 user levels corresponding
to 4 command levels. After a user of certain level logs in, it can only use the
commands of the same or lower level.
There are 4 command levels, namely access, monitor, configure and manage, as
follows: