3Com 3031 Command Reference Manual page 746

746 C 7: M C C C
HAPTER ULTICAST OMMON ONFIGURATION OMMANDS
Description
Using the display bgp multicast routing-table statistic command, you can view
statistics of MBGP route information.
Example
Display statistics of MBGP route information.
<3Com> display bgp multicast routing-table statistic
import-route Syntax
import-route protocol [ route-policy policy-name ] [ med metric ]
undo import-route protocol
View
IPv4 multicast sub-address family view
Parameter
protocol: Source routing protocols that can be imported, which can be direct,
ospf, ospf-ase, ospf-nssa, rip, isis and static at present.
metric: Metric value loaded by an imported route.
policy-name: Route policy used by an imported route.
Description
Using the import-route command, you can import routing information from other
protocols to BGP. Using the undo import-route command, you can cancel the
importing of routing information from other protocols.
By default, BGP will not import routing information from other protocols.
Example
Configure to import a static route.
<3Com-bgp-af-mul] import-route static
ipv4-family multicast Syntax
ipv4-family multicast
undo ipv4-family multicast
View
BGP view
Parameter
None
Description
Using the ipv4-family multicast command, you can enter the IPv4 multicast
sub-address family view. Using the undo ipv4-family multicast command, you can
remove all the configurations in the IPv4 multicast sub-address family view.