3Com 3031 Command Reference Manual page 122

122 C 2: S M
HAPTER YSTEM
snmp-agent
& M
AINTENANCE ANAGEMENT
An SNMP user is the remote user who executes SNMP management operation.
The snmp-agent usm-user command is used to specify the SNMP user.
Example
Display the information about all the current users.
<3Com> display snmp-agent usm-user
User name: authuser
Engine ID: 8000007DB20000000C025808 active
The following table describes the corresponding fields displayed above.
Table 7 Description of display snmp-agent usm-user fields
Content
authuser
User name
Engine ID
Active
Syntax
snmp-agent
undo snmp-agent
View
System view
Parameter
None
Description
Using the snmp-agent command, you can enable the SNMP Agent and specify the
SNMP configuration information. Using the undo snmp-agent command, you can
disable SNMP Agent.
By default, the SNMP Agent is disabled.
The snmp-agent command can be used to enable SNMP Agent, and any
configuration command of snmp-agent can also enable SNMP Agent. However,
the undo form of the corresponding command does not have the functions. It will
be invalid configuring the undo form of the command when the SNMP Agent is
not enabled.
The undo snmp-agent command is used to disable the SNMP Agent on the
condition that SNMP Agent has been enabled.
C
OMMANDS
Description
Modify display information
Character string used to identify the SNMP user
Character string used to identify the SNMP
device
Indicate the state of SNMP USER