3Com 3031 Command Reference Manual page 818

818 C 8: MPLS B
HAPTER
display mpls rsvp-te
peer
display mpls rsvp-te
path
display mpls rsvp-te resv
C C
ASIC ONFIGURATION OMMANDS
Syntax
display mpls rsvp-te peer [ interface interface-type interface-number ]
View
Any view
Parameter
interface-type: Specifies interface type.
interface-number: Specifies interface number.
Description
Using the display mpls rsvp-te peer command, you can view peer information for
RSVP.
By default, the peer information of all RSVP interfaces will be displayed.
Example
Display the peer information of all RSVP interfaces.
[3Com] display mpls rsvp-te peer
Syntax
display mpls rsvp-te path [ destination ip-address | lsp-id ip-address | source
ip-address | tunnel-id ip-address | verbose]
View
Any view
Parameter
ip-address: Specifies an ip address.
verbose: Detail information to display.
Description
Using the display mpls rsvp-te path command, you can view path information for
RSVP.
Example
Display path information of all RSVP interfaces.
[3Com] display mpls rsvp-te path
Syntax
display mpls rsvp-te resv [ destination ip-address | lsp-id ip-address | source
ip-address | tunnel-id ip-address | verbose]
View
Any view