3Com 3031 Command Reference Manual page 335

interface-num: Interface number, which can determine an ATM interface together
with interface-type.
pvc-name: PVC name, optional parameter. If no PVC name and no VPI/VCI pair are
specified, the information about all PVCs within the specified ATM interface will
be displayed by default.
vpi/vci: VPI/VCI pair, optional. For more details, please refer to "Parameter
Description" in the pvc command.
Description
Using the display atm pvc-info command, you can view the information about
PVC.
The interface-name parameter is actually composed of interface-type and
interface-num. The difference of using them only lies in the space. In the
command line, there are spaces in interface-type and interface-num, but there is
no space in interface-name.
For the related command, see pvc.
Example
Display the information about PVC of all ATM interfaces.
<3Com> display atm pvc-info
The following information is displayed:
VPI/VCI | STATE | PVC-NAME | INDEX | ENCAP | PROT | INTERFACE
--------|-------|----------|-------|-------|------|----------
1/32
1/33
1/55
2/66
2/101
The explanation on the above messages is as follows (Taking the first record as an
example, and the last four records can refer to the following explanation.):
PVC with VPI/VCI pair as 1/32, its has been activated (UP) and the name is
"3Com". The index number is 1. The AAL encapsulation type is SNAP. The
application type is IPoA. The interface is ATM main interface: Slot number is 1,
adapter number is 0 and the interface number is 0.
encapsulation
Syntax
encapsulation aal5-encap
undo encapsulation
View
PVC view
|UP |3Com |1
|UP |3Com |5
|UP |datacomm |2
|UP | |4
|UP |beijing |3
ATM Configuration Commands
|SNAP |IP |Atm1/0/0 (UP)
|MUX |None |Atm1/0/0 (UP)
|SNAP |PPP |Atm1/0/0.1 (UP)
|SNAP |IP |Atm1/0/0.4 (UP)
|SNAP |ETH |Atm1/0/0.2 (UP)
335