3Com 3031 Command Reference Manual page 699

View
Any view
Parameter
interface-type interface-number: Interface type and interface number of the
router, used to specify the interface. If the parameters are not specified,
information about all the interfaces running IGMP will be displayed.
Description
Using the display igmp interface command, you can view the IGMP configuration
and running information on an interface.
The information displayed through display igmp interface will be different
according to the configuration of IGMP proxy on an interface.
Example
Display the IGMP configuration and running information on an interface.
<3Com> display igmp interface
Ethernet0/0/0 (10.10.1.20):
LoopBack0 (20.20.20.30):
display igmp local Syntax
display igmp local
View
Any view
Parameter
local: Information of the local interface which receives and sends multicast data.
If the interface is neither a proxy nor a client, the configuration of IGMP Proxy
will not be displayed.
If the interface is a proxy, all the clients will be displayed.
If the interface is a client, the proxy will be displayed.
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Policy to accept IGMP reports: none
Querier for IGMP: 10.10.1.10
Total 2 IGMP groups reported
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Policy to accept IGMP reports: none
Querier for IGMP: 20.20.20.30 (this router)
No IGMP group reported
IGMP Configuration Commands 699