3Com 3031 Command Reference Manual page 340

340 C 4: L L
HAPTER INK AYER
map ppp
P
ROTOCOL
Description
Using the map ip command, you can create IPoA mapping for PVC. Using the
undo map ip command, you can delete the mapping.
By default, no mapping is configured. If a mapping is set, pseudobroadcast is not
supported by default.
When InARP is used, it must be aal5snap encapsulation type. InARP is not
supported when aal5mux and aal5nlpid encapsulations are adopted.
Example
The two examples are the cases creating IPoA mapping for PVC.
Display how to create a static mapping at PVC 1/32, specify the opposite IP
address to 61.123.30.169 and support pseudobroadcast.
[3Com-atm-pvc-Atm1/0/0-1/32] map ip 61.123.30.169 broadcast
Display how to enable InARP at PVC 1/33 to automatically obtain the opposite
address and send InARP packets every 10 minutes.
[3Com-atm-pvc-Atm1/0/0.1-1/33] map ip inarp 10
Syntax
map ppp virtual-template vt-number
undo map ppp View
View
PVC view
Parameter
Virtual-template (VT) Interface number corresponding to PPPoA. It should be
created previously.
Description
Using the map ppp command, you can create PPPoA mapping at PVC in PVC view.
Using the undo map ppp command, you can delete the mapping.
By default, no mapping is configured.
Before this command is used, the VT must have already been created.
Example
Display a complete PPPoA configuration process.
At first, a VT interface with the number 10 is created and its IP address is
configured.