3Com 3031 Command Reference Manual page 414

414 C 5: N
HAPTER ETWORK
dhcp server nbns-list (in
Interface View)
P
ROTOCOL
Example
Reserve the IP addresses in the range of 10.110.1.1 to 10.110.1.63 so that these
addresses will not participate in the address auto-allocation.
[3Com] dhcp server forbidden-ip 10.110.1.1 10.110.1.63
dhcp server ip-pool
3.2.9
Syntax
dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
View
System view
Parameter
pool-name: Address pool name uniquely identifying an address pool, which is a
string comprising at least one character and 35 characters at most.
Description
Using the dhcp server ip-pool command, you can create a DHCP address pool and
access the DHCP address pool view. Using the undo dhcp server ip-pool
command, you can delete the specified address pool.
By default, no DHCP address pool is created.
If the specified address pool has existed, executing the dhcp server ip-pool
command will directly access the DHCP address pool view. If the address pool does
not exist, the DHCP server will create it before accessing the DHCP address pool
view. Each DHCP server is allowed to configure multiple address pools but no
more than 50.
For the related commands, see dhcp enable, expired, and network.
Example
Create DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0]
Syntax
dhcp server nbns-list ip-address [ ip-address ]
undo dhcp server nbns-list { ip-address | all }
View
Interface view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP
addresses separated by spaces in a command.
all: All the NetBIOS server IP addresses.