3Com 3031 Command Reference Manual page 571

display ospf cumulative
Interface: 30.0.0.1 (Ethernet2/0/0)
Cost: 1 State: DR
Priority: 1
Designated Router: 30.0.0.1
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay
1
Area 0.0.0.1:
Authtype: none
SPF scheduled: <>
Interface: 40.0.0.1 (LoopBack0) --> 40.0.0.1
Cost: 1562 State: P To P
Priority: 1
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay
1
Display the routing information of OSPF 100.
<3Com> display ospf 100
OSPF Process 100 with Router ID 1.2.3.4
RouterID: 1.2.3.4
Spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 0
Area Count: 0 Nssa Area Count: 0
Syntax
display ospf cumulative
View
Any view
Parameter
None
Description
Using the display ospf cumulative command, you can view the OSPF cumulative
information.
Example
Display the OSPF cumulative information.
<3Com> display ospf cumulative
IO Statistics
Type InputOutput
Hello 225 437
DB Description7886
Link-State Req1818
Link-State Update 4853
Link-State Ack2521
ASE: 1 Checksum Sum:
LSAs originated by this router
Router: 50SumNet: 40SumASB: 2
LSAs Originated: 92
OSPF Configuration Commands
Type: Broadcast
Flags: <Transit>
Type: PointToPoint
OSPF Protocol Information
FCAF
LSAs Received: 33
571