3Com 3031 Command Reference Manual page 426

426 C 5: N
HAPTER ETWORK
dns-list
domain-name
P
ROTOCOL
The child node of the current node is address pool 6.
child node:6
The node in this position can be:
Child node, which is the child node (subnet) address pool of the current address pool
Parent node, which is the father node (natural network segment) address pool of the current
node
Sibling node, which is the next sibling node (another subnet on the same natural network
segment) address pool. The order of sibling nodes depends on the order in which they are
configured.
PrevSibling node, which is the previous sibling node of the current node
option Self-definable DHCP option
expired The address lease period that is indicated by days, hours, and minutes
gateway-list The egress GW router allocated to DHCP clients
dns-list The DNS servers allocated to DHCP clients
domain-name Domain name specified for DHCP clients
nbns-list The NetBIOS server allocated to DHCP clients
netbios-type NetBIOS node type specified for DHCP clients
Syntax
dns-list ip-address [ ip-address ]
undo dns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of the DNS. You can configure up to eight IP addresses
separated by spaces in a command.
Description
Using the dns-list command, you can configure DNS server IP addresses in a global
DHCP address pool. Using the undo dns-list command, you can delete the
configuration.
By default, no DNS server address is configured.
By far, only up to eight DNS server addresses can be set in each DHCP address
pool.
For the related commands, see dhcp server dns-list interface, dhcp server dns-list,
and dhcp server ip-pool.
Example
Specify 1.1.1.254 as a DNS server address for DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0] dns-list 1.1.1.254
Syntax
domain-name domain-name
undo domain-name domain-name
View
DHCP address pool view