3Com 3031 Command Reference Manual page 603

Description
Using the display isis interface command, you can view the information of the IS-IS
enabled interface.
This command views the information of the IS-IS enabled interface, including
interface name, IP address, link state of the interface and so on. Besides displaying
all the information shown by the display isis interface command, the display isis
interface verbose command displays such information about the IS-IS parameters
of the interface as CSNP packet broadcast interval, Hello message broadcast
interval and number of invalid Hello messages.
Example
Display the information about the IS-IS enabled interface.
<3Com> display isis interface
Interface
Ethernet1/0/0
Display the details of the IS-IS enabled interface.
<3Com> display isis interface verbose
Interface
Ethernet1/0/0
Secondary IP Address(es):
Csnp-Interval:
Hello-Interval:
Hold Time
Lsp Interval: 1
Cost
Priority
Retransmit Interval:5
display isis lsdb
Syntax
display isis lsdb [ l1 ] [ l2 ] [ level-1 ] [ local ] [ level-2 ] [ verbose ] [ LSPID ]
View
Any view
Parameter
Description
Using the display isis lsdb command, you can view the link state database of the
IS-IS.
Example
Display the output information of display isis lsdb command.
<3Com> display isis lsdb
IP Address
2.1.1.12
IP Address
2.1.1.12
L110L210
L110L210
: L110L210
: L164L264
l1 and Level-1: Both refer to the link state database of Level-1.
l2 and level-2: Both refer to the link state database of Level-2.
local: Displays the Contents of the Local LSP Database
verbose: Displays the verbose information of the link state database.
LSPID: Specifies the LSPID of the network-entity-title.
Integrated IS-IS Configuration Commands
Id Link.Sta IP.Sta
001 Up Up
Id Link.Sta IP.Sta
001 Up Up
: L1 30 L2 30
603
MTU Type DR
1497 L12 No/No
MTU Type DR
1497 L12 No/No