3Com 3031 Command Reference Manual page 328

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

debugging atm event

debugging atm event [ interface { interface-name | interface-type interface-num } [

pvc { pvc-name | vpi/vci } ] ]

undo debugging atm event [ interface { interface-name | interface-type

interface-num } [ pvc { pvc-name |[ vpi/vci ] | vpi/vci } ] ]

interface-name: ATM interface name. For detailed naming rules, please refer to

"Interface Configuration" part of this manual. If it is not specified, all the event

debugging of ATM is enabled by default (including global debugging,

interface-level debugging and PVC-level debugging).

interface-type: Interface type, which can determine an ATM interface together

with interface-num.

interface-num: Interface number, which can determine an ATM interface together

with interface-type.

pvc-name: PVC name, optional. If no PVC name and no VPI/VCI pair are specified,

all the event debugging of PVC will be enabled.

vpi/vci: VPI/VCI pair, optional. For more details, please refer to "Parameter

Description" in the pvc command.

Using the debugging atm event command, you can enable the event debugging

of ATM. Using the undo debugging atm event command, you can disable the

By default, all the debugging of ATM event is disabled.

The interface-name parameter is actually composed of interface-type and

interface-num. The difference of using them only lies in the space. In the

command line, there are spaces in interface-type and interface-num, but there is

no space in interface-name.

This command is used to enable all the debugging of events that happen at the

ATM interface or a PVC, which can be used to trace some essential events of the

system. Such information may be helpful for detecting network faults.

The example is a case to enable the debugging of ATM events and display the

Enable all the event debugging of ATM.

<3Com> debugging atm event