3Com 3031 Command Reference Manual page 737

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

MSDP Configuration Commands

peer-address: Address from which the local router receives SA request messages

sent by the specified MSDP peer.

acl acl-number: Number of basic IP ACL, describing multicast group address,

ranging from 1 to 99. If no ACL is specified, all SA request messages will be

Using the peer sa-request-policy command, you can limit SA request messages

that the router receives from MSDP peers. Using the undo peer sa-request-policy

command, you can remove the limitation.

By default, the router receives all SA request messages from the MSDP peer.

If no ACL is specified, all SA requests will be ignored. If ACL is specified, only those

SA request messages from the groups permitted by the ACL will be processed and

all the others will be ignored.

For the related command, see peer.

Configure the ACL for filtering SA request messages from the MSDP peer

175.58.6.5. The SA request messages from group address range 225.1.1.0/8 will

be received and all the others will be ignored.

<3Com> system-view

<3Com] acl number 1

<3Com-acl-basic-1] rule permit source 225.1.1.0 0.0.0.255

<3Com-acl-basic-1] quit

<3Com-msdp] peer 175.58.6.5 sa-request-policy acl 1

reset msdp peer

reset msdp peer peer-address

peer-address: Address of MSDP peer.

Using the reset msdp peer command, you can reset TCP connection with the

specified MSDP peer, and clear all the statistics of the specified MSDP peer.

For the related command, see peer.