3Com 3031 Command Reference Manual page 512

512 C 5: N
HAPTER ETWORK
display dlsw remote
display llc2
P
ROTOCOL
Syntax
display dlsw remote [ ip-address ]
View
Any view
Parameter
ip-address: Displays the information of the remote peer with specified IP
address or of all the remote peers.
Description
Using the display dlsw remote command, you can view the information of the
remote peers. The output information helps the user to understand the
connection state between the DLSw and the remote peers.
Example
Display the information of the remote peers.
<3Com> display dlsw remote
Peers:
*TCP 11.0.0.1
*TCP 13.0.0.1
*TCP 14.0.0.1
Syntax description:
*TCP: The * mark indicates the connection can be created on the peer. If there is
no this mark before the TCP, it indicates it is an inactivated backup peer.
Peers: The IP address used by PEER.
State: The PEER state.
pkts_rx: The number of packets received by PEER.
pkts_tx: The number of packets sent by PEER.
drops: The number of packets dropped by PEER.
uptime: The connecting time.
Syntax
display llc2 [ circuit correlator ]
View
Any view
Parameter
correlator: ID used to distinguish different circuits.
Description
The display interface command is used to display statistical information of LLC2.
Example
Display the statistical information of LLC2
State pkts_rx
DISCONNECT 0
DISCONNECT 0
CONNECT 1897
pkts_tx drops uptime
0 0 00:00:00
0 0 00:00:00
1899 0 14:26:22