3Com 3031 Command Reference Manual page 445

Outbound interface
Example
Display the summary of the forwarding information base.
<3Com> display fib
Destination/MaskNexthopFlagTimeStampIInterface
80.10.0.2/3280.10.0.2GHUt[0]Serial2/0/0
80.10.255.255/32127.0.0.1HUt[0]InLoopBack0
80.10.0.0/1680.10.0.1Ut[0]Serial2/0/0
80.50.0.2/3280.50.0.2GHUt[0]Serial2/0/0
80.50.255.255/32127.0.0.1HUt[0]InLoopBack0
display fib acl
4.1.7
Syntax
display fib acl { listnumber | listname }
View
Any view
Parameter
listnumber: The ACL rules expressed in number, ranging from 1 to 99.
listname: The ACL rules expressed in name.
Description
Using the display fib acl command, you can filter and display FIB information.
According to ACL number or name entered, you can display the FIB table entries
matching the filtering rules in a format.
A standard ACL name must be input if the ACL is expressed in name; otherwise,
the system will prompt an abnormal entering. When the ACL name or number
ranging from 1 to 99 is entered, the corresponding ACL will be searched. If no
ACL is found, all FIB table entries information will be displayed; and if such an ACL
is found, the FIB table entries information will be output in a format.
If the number of FIB table entries matching the filtering rules is 0, the following
information will be output:
Route entry matched by access-list 2:
Summary count: 0
If the number of FIB table entries matching the filtering rules is not 0, the FIB table
entry information will be output in the following format:
Route entry matched by access-list 1:
Summary count: 1
Destination/MaskNexthopFlagTimeStampInterface
127.0.0.0/8127.0.0.1Ut[0]InLoopBack0
Example
Display the FIB table entries matched by the ACL.
<3Com> display fib acl 10
Route entry matched by access-list 10:
IP Performance Configuration Commands 445