3Com 3031 Command Reference Manual page 50

50 C 2: S M
HAPTER YSTEM
display device
display schedule
reboot
& M
AINTENANCE ANAGEMENT
GET 3 TEMPERATUREPOINT VALUE SUCCESSFULLY
environment information:
Temperature information:
local CurrentTemperature
(deg c )
RPU 34
VENT 31
Syntax
display device slot-number
View
Any view
Parameter
slot-number: Slot number.
Description
Using the display device command, you can display the system hardware
configuration information, including the in-position states of MPU, NPU, interface
card, power module, and fan module, the operating state of interface card, power
module, and fan module, as well as the offline information of MPU and NPU.
Executing the command defined without parameters will display the essential
information of all the devices in position. Executing the command defined with
the parameter slot-number will display only the details on the defined slot,
including reset times and history records of the reset causes.
Example
Display the essential information of the router.
<3Com> display device
Slot # Type
0 RPU
6 PWR
7 FAN
Syntax
display schedule reboot
View
Any view
Parameter
None
C
OMMANDS
LowLimit
(deg c)
0
0
Online Status
Present Normal
Present Normal
Present Normal
HighLimit
(deg c )
80
80