3Com 3031 Command Reference Manual page 499

ipx sap gns-disable-reply
ipx sap gns-load-balance
Re-enable SAP on the interface Ethernet0/0/0.
[3Com-Ethernet0/0] undo ipx sap disable
Syntax
ipx sap gns-disable-reply
undo ipx sap gns-disable-reply
View
Interface view
Parameter
None
Description
Using the ipx sap gns-disable-reply command, you can disable IPX GNS reply on
the current interface. Using the undo ipx sap gns-disable-reply command, you can
enable IPX GNS reply on the current interface.
By default, GNS reply is enabled on an interface.
Example
Disable GNS reply on the interface Ethernet0/0/0.
[Ethernet0/0/0] ipx sap gns-disable-reply
Re-enable GNS reply on the interface Ethernet0/0/0.
[Ethernet0/0/0] undo ipx sap gns-disable-reply
Syntax
ipx sap gns-load-balance
undo ipx sap gns-load-balance
View
System view
Parameter
None
Description
Using the ipx sap gns-load-balance command, you can configure the router to
respond GNS request in Round-robin method, i.e., all servers respond GNS request
in turn. Using the undo ipx sap gns-load-balance command, you can configure the
nearest server to respond GNS request.
By default, for GNS request, a router will inform all servers it knows to respond in
Round-robin method to avoid overload of one server.
For the related command, see ipx sap gns-disable-reply.
Example
Configure the nearest server to respond GNS request.
IPX Configuration Commands 499